|10 Days||20 Days||1 Month||2 Months||3 Months||4 Months||6 Months||9 Months||1 Year|
|€ 135||€ 225||€ 315||€ 585||€ 845||€ 1115||€ 1610||€ 2310||€ 3010|
MONOBLOC BODY WITHOUT TIE RODS
The whole SB series benefits from the special "monobloc" construction. This feature makes the structure extremely resistant to the linkage efforts during work. The breaker is manufactured in one single piece and without tie rods.
NITROGEN ENERGY REVOVERY
All the breakers work with nitrogen inertial energy recovery. The gas gives much power to the machine and it also reduces the stress on the excavator’s arm.
LONGLASTING NITROGEN CHARGE
In the past, breakers with nitrogen energy recovery required frequent recharges. With the new SB range, by using special sealing rings on the floating support, we have increased by 300% the gas charge life.
The special construction, with completely closed casing, together with soundproofing material has enabled to achieve very low noise levels for a breaker.
The new SB range tolerates high back-pressure and it has a wider range of flow calibration of the required oil supply, in order to make the setup easier.
The SB breakers, thanks to their tapered shape, ensure excellent visibility while working and they allow to operate very close to walls.
CARRIER WEIGHT ton:3,0-8,0
HEIGHT WITH STANDARD TOOL mm:1250
CHISEL DIAMETER mm:65
REQUIRED OIL SUPPLY l/min:30-70
OIL PRESSURE ADJUSTED TO THE HAMMER bar:140
BLOWS PER MINUTE min:900-1100
ENERGY PER BLOW joule:950
MAX BACK PRESSURE bar:25
INNER DIAMETER IN HOSE mm:3/4"
INNER DIAMETER OUT HOSE mm:3/4"