|10 Days||20 Days||1 Month||2 Months||3 Months||4 Months||6 Months||9 Months||1 Year|
|€ 300||€ 530||€ 800||€ 1525||€ 2250||€ 2880||€ 4150||€ 5950||€ 7600|
2 ADJUSTING VALVES ON MODELS FROM FX1200 TO FX15000
PREVENTION SYSTEM FOR IDLE BLOWS (STANDARD)
During the stroke of the piston, when the object to be demolished is broken, typically occur idle blows, but in the FX series, these are automatically prevented.
MANUAL ADJUSTMENT OF THE NUMBER OF BLOWS (STANDARD)
An adjustment of the blows is possible through the control valve placed on the cylinder of the hammer.
ADJUSTMENT OF THE OPERATING PRESSURE (STANDARD)
Thanks to a valve frontally placed on the distribution, it is possible to adjust the working pressure from 160 bar to 200 bar.
SAFETY VALVE (STANDARD)
Only on the FX1800 and FX2500 models there is a safety valve that opens automatically when the operating pressure exceeds 210/220 bar, thus protecting the hammer by an overload.
GREASING DEVICE (OPTIONAL)
The inner standard pipes allow direct greasing of the lower bush and the spacer, thereby improving the lasting of retainer pins and bush.
Furthermore, the replacement of the greasing nipple with the tubes allows the possibility of greasing by controls in the cab or automatically, by vibration of the hammer.
DUST DEVICE (STANDARD)
A special device prevents the dust (for example, rock dust) from entering into the “chuck housing." The presence of a "Air Filter" and a "non-return valve" into back head and in the chuck housing eliminates the "inflating" phenomenon, caused by movement up and down of the piston, thus creating an automatic effect of dust prevention.
TUNNEL/UNDERWATER FUNCTION COMPATIBILITY (OPTIONAL)By adding air tubes, it is also possible to carry out works in tunnels and underwater.
CARRIER WEIGHT ton:16-24
HEIGHT WITH STANDARD TOOL mm:2600
CHISEL DIAMETER mm:120
REQUIRED OIL SUPPLY l/min:105-145
OIL PRESSURE ADJUSTED TO THE HAMMER bar:170
BLOWS PER MINUTE min:400-900
ENERGY PER BLOW joule:3700
MAX BACK PRESSURE bar:25
INNER DIAMETER IN HOSE mm:1"
INNER DIAMETER OUT HOSE mm:1"